+86-0371-67989006 
how to reversed and reduce the meter of fuel dispensers from 382127.65 to 378853.45
Recommend Products
-
E-Man Series Fuel Dispenser
-
CS46-Classic Series Fuel Dispenser
-
CS42-Classic Series Fuel Dispenser
-
LNG dispenser
-
LPG dispenser
-
CNG Loading device / unloading device
-
Vehicle-card identification fuel station management system VC-FMS
-
Automatic Tank Gauge System
-
Censtar Mobile fuel station CSMF30(30000L)
fuel pump test reversing polarity? Yahoo Answers
i want to test both in tank pumps on my ford econoline van (dual tanks). I have two low pumps inside the tanks and one hi pump on the frame rail. What I want to do is first take the external pump and run wires to the electric connectors REVERSED (meaning placing the neg wire of a batt to the pos of the pump and pos of batt to neg of pump) to unstick it.
The GM Fuel Gauge PMystery 1965 & Newer
The GM Fuel Gauge PMystery 1965 & Newer Diagnosing a problem with a GM fuel gauge or sending unit can be very frustrating and part of this frustration comes from not knowing the theory behind what makes that little needle swing back and forth in your dash or console. And, there are a lot of enthusiasts out there who are deathly afraid of the
Adapting mismatched fuel gauge and sending unit
increase it. (You also REDUCE the current going through the sending unit since some of it is shunted through the resistor). Now, resistances in series add. So you could take a 20 ohm resistor, put it in series. Then, when the sending unit is at 10 ohms, the meter sees 30 ohms. And when the sending unit is at 73 ohms, the meter sees 103 ohms.
Xflo Fuel Meter Wayne Fueling Systems
Engineered for easy retrofit in existing fuel dispensers or available as an option in new Wayne dispensers, the Xflo Meter is easy to incorporate into your forecourt. Through the combination of fuel savings and lower maintenance costs, it can pay for itself in a short period of time.
Will my fuel tank empty if I leave the fuel lines
Will my fuel tank empty if I leave the fuel lines disconnected? Not to mention the fuel would probably need to get through some filters and pumps too. The fuel in the pipes might evaporate which might mean you will need to let the fuel pump build pressure first and in rare cases you may need to prime the system but I think you will be fine
Fuel gauge doesn't read correctly when fuel gets to 1/4
Fuel gauge doesn't read correctly when fuel gets to 1/4 left. It'll drop all the way down to empty even know it has fuel.